Hydrogen Fueled Engine Power Plant
"Designed For Super Lean Gaseous H2 Fuelling Better Choice than Industrial Fuel Cell" National Power Grid Operator.
Electric Generators, Water Pumps. 24 hr Continuous operation.
Possibly the Most Fuel Efficient Power Plant Engine Ever Built
47% Efficient Hydrogen Engine Gensets "Mining Company"
#Solar #Power #Gas #Hydrogen #Storage #Generator #Engines
Drone Refuelers NEW Page Here
" Amazing , I can't thank you enough Daniel, this is exactly what we need at the Drone Port to run the Rapid Charger fuel cells and Fuel Cell drone gas fills" Architect
Fuel Cell Gas Fuel Delivery Solutions New Updating
" Dan and Secure Supplies team you have really opened my mind to what is available application wise, and all is valid and available thanks for choosing to work with us" Gas Engineer.

-
Engine = GR-CC401G-Ca 28.0 HP @ 3,600 RPM The prototype Gen-Set can be configured as follows:
-
150 amp. output @24 volt = 3.6 Kw The Gen-Set will utilize 18 HP in this configuration
-
350 amp. output @24 volt = 8.4 Kw The Gen-Set will utilize 18 HP in this configuration
-
500 amp. output @24 volt = 12 Kw The Gen-Set will utilize 28 HP in this configuratio
-
Future Gen-sets will be built using the GR-OC651G-Ca engines, producing about 20 Kw of power.
-
A smaller engine (20 HP @ 6,000 rpm) will be used in a 5 Kw Gen-set.
.
Looking at Our Engines?
Purchase a Containerized fuel Maker?
It will make the Gas On Damand for you Engine and or Engine Gas Grid.
They can fit to Solar sites 1mw to 2 mw and be daisy chaing on pipe line gas grids
Power to Gas Value add all Solar sites
Fuel Maker Spec for Reference
Fuel Makers
-
40' FCL Shipping continer pre configured with pipline fitting and Hydrogen on demand equipment ( tanks not required nor included)
-
99% Pure H2 99% >(v/v) line Connect to Pipe line grid , sell gas use gas to fuel engines and fuel cells.
-
O line 99% >(v/v) Sell the gas or vent to the atmosphere save the world.
-
1.6 MPA both lines , 16 bar/ 232 PSI
-
Rate H2 Out put 100 Nm3/h 1667/litre per minute x 15.790772267 STM = 26323 . 217
-
Rated O2 Out put 50 NM3/h
-
Power <520 KWh (DC) Secure Supplies your Ideal Parnter in Healthy Community Fueling
-
Our Units are basically 5.2 kw/h dc from renewables for 1 Nm3 of He gas 99.9 % Purity
Equipment pricing for Fuel Makers over 20m2/h of pure h2 99.9%
Multi Voltage dc,single phase 2 phase 3 phase with advanced unique powering options
Price $2500 to $4500 per 1 M3/h Depending on the enginneering and certifications for each survey design and install.
ROI is Base don 10 Years Minimum Life Span $10 per 1Nm3 gas value for sales, making 100Nm3/h 6 hr per day or 24 hrs a day.
Price is USD Wholes to All Country Distributers and Venders Price includes engineers and local service.
Customers benefit from:
Independence
Our innovative gas generation technologies produce nitrogen, oxygen and hydrogen gases when and where it is needed, thereby eliminating the cost and logistics of trucked in supplies. Systems can be purchased outright or rented.
Lower cost and long term price stability
Customers benefit from immediate cash flow savings and long term price stability without capital expenditure, depreciation nor maintenance cost.
Increased productivity & profitability
We have a unique portfolio of gas generation solutions & specialist services that help our customers to reduce technology risks and increase productivity and profitability.
Customised Financing Programs
We provide innovative vendor financing programs from "build, operate & transfer" , "build, operates & own" to gas supply Secure Supplies contracts to help customer minimize the cost of ownership.
Secure Supplies is recognized for its innovative culture, operational excellence and commitment to safety and the environment.
Installations in partnership with our service partner to-date throughout the globe.
Secure Supplies have built lasting relationships with customers based on understanding, integrity and commitment to quality.
Mb + 66 83 647 3443
Daniel
FACT NOTES
Nm3 (normal m3) of air is a volume of 1m3 of air under
normal conditions of pressure (1 atm = 101.330 kPa) and
temperature (0 deg C = 273 K) (Europe);
Since air can be assumed to behave as an ideal gas under
those conditions, its compressibility factor is 1; so in
the relation:PV=ZmRT; Z=1;R for air= 0.287 kPa.m3/(kg.K);
V=1m3; therefore 101.330*1=1*m*0.287*273; so m = 1.295 kg.
Conversion factor: 1 Nm3/hr = 1.295 kg/hr
Example 20 Nm3/hr = 20x1.2929 kg/hr
====================================================
Mass of 1 mole hydrogen gas (H2) = 2 grams. So the mass of 22.4 liters (stp) H2 is 2 g
megapascal [MPa]: 1.6 = pascal [Pa]:1600000 1.6 megapascal = 16 bar=1.6 megapascal = 15.790772267 Standard atmosphere x 22.4 liters =353.713298
megapascal [MPa]: 0.1 = pascal [Pa]:100000 0.1 megapascal = 1 bar = 0.1 megapascal = 0.986923267 Standard atmosphere x 22.4 liters =22.107080
SOLAR TO GAS
Business
Make Fuel Gas from Solar Systems

The Above Fuel Maker is Engineered for Solar to Gas.
Power To Gas Applications from Renewables all types
Shipped as a ready unit.
Kg/hr -- Cubic meter/hour ↔ Liter/minute Conversions
remember it is line pressure dependant
Table
1.295 kg/hr |1m3/h = 16.666667 L/min x 15
2.59 kg/hr |2 m3/h = 33.333333 L/minx 15
3.885 kg/hr |3 m3/h = 50 L/minx 15
5.18 kg/hr |4 m3/h = 66.666667 L/minx 15
6.475 kg/hr |5 m3/h = 83.333333 L/minx 15
7.77 kg/hr |6 m3/h = 100 L/minx 15
9.065 kg/hr |7 m3/h = 116.666667 L/minx 15
10.36 kg/hr |8 m3/h = 133.333333 L/minx 15
11.665 kg/hr|9 m3/h = 150 L/minx 15
12.95 kg/hr |10 m3/h = 166.666667 L/minx 15
14.245 kg/hr|11 m3/h = 183.333333 L/minx 15
15.54 kg/hr |12 m3/h = 200 L/minx 15
16.835 kg/hr|13 m3/h = 216.666667 L/minx 15
18.13 kg/hr |14 m3/h = 233.333333 L/minx 15
19.425 kg/hr|15 m3/h = 250 L/min x 15
20.72 kg/hr |16 m3/h = 266.666667 L/min x 15
22.015 kg/hr|17 m3/h = 283.333333 L/minx 15
23.31 kg/hr |18 m3/h = 300 L/minx 15
24.605 kg/hr|19 m3/h = 316.666667 L/minx 15
25.9 kg/hr |20 m3/h = 333.333333 L/minx 15
27.195 kg/hr |21 m3/h = 350 L/minx 15
28.49 kg/hr |22 m3/h = 366.666667 L/minx 15
29.785 kg/hr |23 m3/h = 383.333333 L/minx 15
31.08 kg/hr |24 m3/h = 400 L/minx 15
32.375 kg/hr |25 m3/h = 416.666667 L/minx 15
33.67 kg/hr |26 m3/h = 433.333333 L/min x 15
34.965 kg/hr |27 m3/h = 450 L/minx 15
36.26 kg/hr |28 m3/h = 466.666667 L/minx 15
37.555 kg/hr |29 m3/h = 483.333333 L/minx 15
38.85 kg/hr |30 m3/h = 500 L/minx 15
40.145 kg/hr |31 m3/h = 516.666667 L/minx 15
41.44 kg/hr |32 m3/h = 533.333333 L/minx 15
42.735 kg/hr |33 m3/h = 550 L/minx 15
44.03 kg/hr |34 m3/h = 566.666667 L/minx 15
45.325 kg/hr |35 m3/h = 583.333333 L/minx 15
46.62 kg/hr |36 m3/h = 600 L/minx 15
47.915 kg/hr |37 m3/h = 616.666667 L/minx 15
49.21 kg/hr |38 m3/h = 633.333333 L/minx 15
50.505 kg/hr |39 m3/h = 650 L/minx 15
51.8 kg/hr |40 m3/h = 666.666667 L/minx 15
53.095 kg/hr |41 m3/h = 683.333333 L/minx 15
54.39 kg/hr |42 m3/h = 700 L/minx 15
55.685 kg/hr |43 m3/h = 716.666667 L/minx 15
56.98 kg/hr |44 m3/h = 733.333333 L/minx 15
59.275 kg/hr |45 m3/h = 750 L/minx 15
59.57 kg/hr |46 m3/h = 766.666667 L/minx 15
60.865 kg/hr |47 m3/h = 783.333333 L/minx 15
62.16 kg/hr |48 m3/h = 800 L/minx 15
63.45 kg/hr |49 m3/h = 816.666667 L/minx 15
64.75 kg/hr |50 m3/h = 833.333333 L/min 20 FCL Container
129.5 kg/hr |100 Nm3/h 1667/litre per minute 40 fcl container x 15
Most Popular Product
129.5 kg/hr | 100 Nm3/h 1667/litre per minute 40 fcl container x 15
99.99% pure h2 520 kw dc/hr 16 bar .
Bigger than this this size must be shipped
as small factories in multiple containers
though LPG Reformers can be supplied 40 fcl 300nm3/h See
Reformers are custom made for each site
price from $1500 to $2500 usd per 1m3/h
Price varies for survey design supply and engineering involved
DESIGN
-
Air or Liquid Cooled
-
High power to weight ratio >1 lb/hp
-
Very Low Vibration
-
Very Lightweight construction
-
Small, compact form factor
-
Separate oil system
-
Electronic engine management
-
Automatic Altitude compensation
-
Manufactured to Aerospace standards (AS9100)
BASIC SPECIFICATIONS
-
Single rotor Wankel rotary engine
-
Air Cooled (Coming soon)
-
Liquid Cooled
-
15.5hp to 18 hp Models @10,500 Continuous
-
Weight 6.8kg (15lb) Fully Dressed*
-
Fuel system: Electronic fuel injection
-
Ignition system: via ECU (Delux Item for Mini Rotary)
-
Fly by wire bi-direction system control
-
Multi Fuel – Gasoline or JP8 (JET A1) GASEOUS
-
Integral starter generator option
Secure Supplies is Proud
to Introduce this new Manufacturers Engines.
Specified For High performance applications requiring Heavy Fuel and Multi Fueling.
Focus is Water Pumps and Power Generation to 10 kw


Need Small ?
Rotary Power Generator / Water Pumps
Secure Supplies is manufacturing a series of power generators for various applications.
This will include stand-by generators, agricultural power, marine generators, fire-engine power supply units, refrigeration power supply units, plus many others.
Future
The liquid cooled version has been specifically designed to operate in applications that require continuous high output.
Gen-Sets are configured to produce different voltages
and amperages, including AC power @ 120 or 240 volts.
They can also include an air conditioning compressor, pumps, or hydraulic power systems in conjunction with the alternators listed below.
For now we have the first Hydrogen conversion kits available to make Hydrogen rotarys,and use them for Water Pumps.
PLease email dan to discuss. danieldonatelli1@gmail.com
2015 Injected
Industrial Fueling
Why Choose Us
Global Reach
Secure Supplies Energy is a Power Solution Provider for Power plant from 5 kw to 2.5GW of capacity ,with a reach across more than 25 countries.
View regional information forAfrica, Americas, Asia-Pacificand Middle East / North Africa.
Technology
Secure Supplies Energy offers the most modern and trusted Power Production Unit in the industry, including Heat to power(no fuel) ,
Hydrogenand Lean power modules,
and Flar egas /natural gas power modules.
We maintain Clean Emission free unit that can be used are Chlroine factories Mining Processing sites and Gas grid distribution locations at 30-40% fuel cost reductions.
Capital Leasing Finance
-
Fast Approvals
-
Technology Access
-
Peace of mind
-
Better ROI
-
Training & Service Partnership.
Business Fueling
Automatic
SOLAR to GAS STORAGE
Once Stored and Your Tanks full
Run your Fuel cells to make power Quietly at Night
Hydrogen Fueled Engine Power Plant
"Designed For Super Lean Gaseous H2 Fueling "
Electric Generators, Water Pumps. 24 hr Continuous operation.
Possibly the Most Fuel Efficient Power Plant Engine Ever Built
HHO Hydrogen Engine Gensets #HHO #Hydrogen #Engine #Generator #gensets #water pumps #powerplant
PRIME POWER PLANT Best Engine and Best Option1 From Secure Supplies
Fueled By Hydrogen Runs 24 hrs Continuous with Load Warranty
German USA and Australian PARTS 150 kw to 1 mw
Applications: Hydrogen Gas Grids ,Community Power and Water, Farms, Mines, Maritime, Trains,
Kit option Methane and Bio Gas Industrial, Flare Gas.
Secure Supplies Primary Focus is Fixed engine applications.
Standy by POWER PLANT Option 2 from Secure Supplies
Fueled By Hydrogen Runs 2 to 4 hrs basic parts warranty
Chinese German and USA Parts 20 kw to 1 mw
Applications : Hotels, Hospitals, Hotels Resorts, small business, emergency power, emergency pumps, cell towers Maritime back up power, portable power, service and utility mobile power.
Secure Supplies Primary Focus is Fixed engine applications.
Price Indications From Secure Supplies
Whilst we have promos and special Survey and Design Pricing
Please touch base to plan and firm order with us.
The Prime Power Option 1 units are beautiful machines.
With a Strong Warranty for Prime Power 24 hr use.
FUEL CELLS NOT COST EFFECTIVE as PRIME POWER
Hydrogen fueled Power Plants a A lot more efficient and cheaper than fuel cells of same size
Fuel cells Example PEM Pure H2 FUEL
300 kWh* 1,8 million usd
600 kWh*3 2.5 million usd
900 kWh*3 3,8 million usd
1,2 MWh*3 4 million usd
PEM efficiency 46 %
non 24 hr full load use if everyday of year.
To Maintain Fuel Cells a full rebuild yearly not designed for warranty over 1 year is used if prime power cost 80,000.00-140,000.00 k usd per year maintain MINIMUM.
BETTER from SECURE SUPPLIES
Engines fuel by pure h2
Engines Prime Power efficiency 47% design
for higher compression than diesel on h2 fuel pure
300 kWh* 350,000 usd
600 kWh*3 550,000 usd
900 kWh*3 850,000 usd
1,2 MWh*3 960,000 usd
24 hr full load use
Maintain standard servicing designed for warranty over 5 year is used in prime power 24 hr every day use for Communities fuels by Hydrogen cost $800.00 usd per year maintain minimum
Get yours today
OPTION 2
Standby Power Only Non continuous
Fueled by Hydrogen. 2 to 4 Hr Run times
1000-3000 RPM 2 year Warranty
-
50KW $22,600 CIF
-
75KW $29,500 CIF
-
100KW $38,500 CIF
-
150KW $68,500 CIF
-
230KW $98,670 CIF
-
300KW $195,320 CIF
-
500KW $335,500 CIF
-
800KW $381,320 CIF
-
1 MW $456,600 CIF
-
Prices include Sound lowering case and all Fueling and Ignition Systems with advanced features.
OPTION 1
Community Powering 24 hr Run Time 365 Days
Continuous 24 hr operations
1000-9000 RPM 5 Year Full Load Warranty
-
300KW $350,000 CIF
-
600KW $550,500 CIF
-
900KW $850,320 CIF
-
1.2 MW $960,000 FOB / CIF advise location.
-
There is No Better Hydrogen Fueled Engine, Premium Industrial and Community Engineering.
-
Depending on Shipping location
-
additional charges may apply.
All at natural pressure: 0.1-0.4Mpa Normal cubic meter (Nm3) - Temperature: 0 °C,
Pressure: 1.01325 barA or 0.101325 megapascal
Basic
Engine Size Electric KW Hydrogen Gas Consumption Pressure KG/hr
4 cylinder 4.16ltr 10 kw 10X 0.3 Nm3/H=3.0 Nm3/H(Normal Meter Cubed per Hour) 0.1-0.4Mpa
4 cylinder 4.16ltr 16 kw 16X 0.3 Nm3/H=4.8 CBM/H(Normal Meter Cubed per Hour) 0.1-0.4Mpa
6 Cylinder 6.34ltr 25 kw 25X 0.3 Nm3/H=7.5 CBM/H(Normal Meter Cubed per Hour) 0.1-0.4Mpa
6 cylinder 9.726 litr 50 kw 50X 0.3 Nm3/H=15 CBM/H(Normal Meter Cubed per Hour) 0.1-0.4Mpa
6 Cylinder 12.1 ltr 75 kw 75X 0.3 Nm3/H=22.5CBM/H(Normal Meter Cubed per Hour) 0.1-0.4Mpa
6 Cylinder 27.24 ltr 100 kw 100X 0.3 Nm3/H=30 CBM/H(Normal Meter Cubed per Hour) 0.1-0.4Mpa
Industiral
Engine Size Electric KW Hydrogen Gas Consumption Pressure KG/hr
6 Cylinder 14 ltr 150 kw 150 X 0.3 Nm3/H=45 CBM/Hr(Normal Meter Cubed per Hour) 0.1-0.4Mpa 3.77 Kg /hr
6 Cylinder 27.24 ltr 230 kw 230X 0.3 Nm3/H=69 CBM/Hr(Normal Meter Cubed per Hour) 0.1-0.4Mpa 5.78 kg/hr
6 Cylinder 50.893 ltr 300 kw 300X 0.3 Nm3/H=90 CBM/Hr(Normal Meter Cubed per Hour) 0.1-0.4Mpa 10 kg/hr
6 Cylinder 50.893ltr 440 kw 440X 0.3 Nm3/H=132 CBM/Hr(Normal Meter Cubed per Hour) 0.1-0.4Mpa 10 kg/hr
8 Cylinder 50.85ltr 550 kw 550X 0.3 Nm3/H=165 CBM/Hr(Normal Meter Cubed per Hour) 0.1-0.4Mpa 10 kg/hr
Gas Convertor http://hydrogen.pnl.gov/tools/hydrogen-conversions-calculator
Prime Power Units S3 Kit
Secure 50L 1 MW Secure 60L 1.2 MW Secure 91 1.7 MW
50 ltr 60 ltr 91.6 ltr
12 cylinder 16 cylinder 18 cylinder
1 MW 1,350 KW 1,700 KW
Consumption Consumption Consumption
H2 kg/hr H2 kg/hr H2 kg/hr
7.88/ 10.38 9.6801/12.58 11.71/ 15.22
Low Load/High Load Low Load/High Load Low Load/High Load
Retail 1.2 Million Retail 1.5 Million Retail 1.9 Million
3,440 cu ft /hr 3,803 cu ft /hr 4,600 cu ft /hr
97.35199 Nm3 /hr 107.70096 Nm3 /hr 130.272 Nm3 /hr
Gas Production
Can be from Secure Supplies Our Power to Gas Units to storage or From Flare/By pass gas
or h2 rich gas 70%+ Methane Ammonia 200nm/hr 18 Kg per 30 bar 99.999% h2 hr 520 kw dc water
We Choose to Focus Pure h2 where ever possible and pure clean.
Storage S2 KIT
Secure Supplies provides Hydrogen and Lean Gas Storage Skids Stationary Fixed rpm Prime load.
Secure 50L 1 MW Secure 60L 1.2 MW Secure 91 1.7 MW Secure Cube 10ft , 7200L,
250 bar 129 kg h2
350 bar 151 kg h2 40 Hr Run time 12 Hr Run time 10 Hr Run time
750 bar kg h2
Secure Store 21,630 L 14 x 20ft
250 bar 387.5 kg h2
350 bar 454 kg h2 28 Hr Run time 36 Hr Run time 30 Hr Run time
750 bar _____ kg h2
Secure Base 23,175 L 15 x 20 ft
| 250 bar 415 kg h2
| 350 bar 486 kg h2 43 Hr Run time 39 Hr Run time 32 Hr Run time
| 750 bar kg h2
Secure 40 Foot 34,047 L4 x 40 ft
250 bar 610kg h2
350 bar 714 kg h2 63 hr Run time 57 Hr Run time 47 Hr Run time
750 bar kg h2
Secure XL 49,250 L 4 x 40 ft, 1 x 30 ft
250 bar 882 kg h2
350 bar 1032 kg h2 91 hr Run time 80 Hr Run time 68 Hr Run time
750 bar kg h2
Notes
** NM3/hr = normal cubic meter per hr
**1 Cubic Foot Per Hour Conversion to
Cubic meter per hour (m³/hour) 0.02832
** H2 1 Nm3 gas = KG 0.08988
** is a Aprox is guess based on the medium load
I am using this calculator to do simple conversions between four popular phase points of hydrogen:
-
liquid at boiling point (-252.87°C at 1 atm).
-
gas at Normal Temperature and Pressure (NTP = 20°C at 1 atm).
-
gas at standard conditions (15.6°C at 1 atm).
-
gas at standard conditions (0°C at 1 atm).
-
1 kg Hydrogen equals 14.128 litres
-
1 Nm3 Gas 0.08988 litres
-
If Natural Gas (Natural Gas BTU rating 1020 BTU/ft3 (38.2 MJ/m3 ) 191.5 g/kW-Hr (42 Ft3 /Min at full load)) Fuel Pressure: 103 kPa (15psig) to 517 kPa (75 psig)
-
If Hydrogen Gas ( Hydrogen – 60,000 BTU lb/ft^3 (110.8 MJ/kg) 66.03 g/kW-Hr ( 14.48 Ft3 /Min at full load) Fuel Pressure: 103 kPa (15psig) to 517 kPa (75 psig)*** these are un proven number in engine above 250 kw
http://hydrogen.pnl.gov/tools/hydrogen-conversions-calculator
http://www.uigi.com/h2_conv.html
http://www.unitconversion.org/flow/cubic-meters-per-hour-to-liters-per-minute-conversion.html
http://www.keengas.com/technical-tips/conversion-data.htm
http://www.convertunits.com/from/pound/cubic+foot/to/lb/ft%5E3
The Figures are at full Operating Load at high altitude setting 2500 rpm
We Achieve 20-30 % under the Indicated Figures in 99% of Installs.
Gas Anylsis is also another factor which is already factor in for worst case.
SECURE SUPPLIES FUEL MAKERS PRODUCE AT Up to 100Nm3 40 FCL 1.6 Mpa Not 0.1 Mpa
Power Consumption is 400 kw/h to 520 kw/h DC at 100/110 Nm3/h 99.9% Purity
or 1 mw DC 200nm3/hr 30 BAR for standard Solar to Gas Model
Our Designs Do not require compressors or tanks
Please touch base with us to Discuss your project requirements.
IMPORTANT ENGINEER EXPERT PROFESSIONAL
NOTES
What is the difference between Nm3 and Sm3?
Unfortunately neither Nm3 (normal cubic meter) or Sm3 (standard cubic meter) are complete definitions in themselves. It is essential to know the standard reference conditions of temperature and pressure to define the gas volume since there are various debates about what normal and standard should be.
Most commonly used reference conditions are:
Normal cubic meter (Nm3) - Temperature: 0 °C, Pressure: 1.01325 barA
Standard cubic meter (Sm3) - Temperature: 15 °C, Pressure: 1.01325 barA
barA: absolute pressure
How do I calculate Nm3 and Sm3 and what is the conversion rate?
The volume of gases changes with temperature and pressure, therefore these parameters are also part of the conversion equation.
The conversion from Sm3 to Nm3:
V1/V2 = (P2xT1) / (P1xT2)
V1/V2 = (288.16x1.013) / (273.16x1.013) = 1.05491287
Temperature is entered in K; 273.16 is temperature of tripple point of water.
Interpretation: 1Nm3 is 5,49% larger than Sm3, 1Nm3>1Sm3
Some of our competitors use 15°C and 981mBar as reference conditions for standard cubic meter.
The calculation is following:
V1/V2 = (288.16x1.013) / (273.16x0.981) = 1.08932389
Interpretation: 1Nm3 is 8,9% larger than Sm3.
It also means the stated capacity of the generator stated in Nm3/h is 8.9% larger than same capacity defined in Sm3/h.
Assumption: It is essential to consider these facts when projecting the gas generating system or when actually making decision to purchase certain model because you might be actually buying less than you actually think you are.
Secure Supplies is Understating the Output and over stating consumptions for you to avoid that mis calculation please note it.
Do you have 100% Hydrogen Fueled Fixed Generator Engines ?
YES
and Also Multi Gas
Fueled Lean Gas Versions
Flare Gas, Bio Gas, Methane
Industrial Fueling Specifications Make Sure to x these number by 15 bar
CURRENT VALUE OF HYDROGEN
IS $10 per 1 KG 2016
hydrogen being sold as the equivalent energy content of one litre of petrol.
This is about £1.30 a litre of petrol
as is £1.30 a litre of Hydrogen as ag uide.
Generally Hydrogen has 2.5 times
the power of gasoline
Consuptions Examples
You can work out from above how many cars you can fill per hour or how long you can run your fuel cells and which size can be run.
-
A Car Typically has a 30 kg Compressed tank
-
1.1 Kw Fuel Cell uses 14 liter of h2 per minute
129.5 liters/hr | 100nm3/hr will do 4.3 cars per hr if they have 30 liter tanks 24 cars per day off solar power.
129litres x $10 is $1290 sold per hr 6 hr day $7740 per day
Case Studies
Hydrogen Farms
Hydrogen Communties
-
A Study of the Experiences of Hydrogen Community Projects in Europe and Worldwide
-
Profiling of Hydrogen Communities in Europe: a Framework for Self-Evaluation & Advice on Success Factors
-
Results from Call for Community Registration of Interest: Mapping Analysis of Potential Hydrogen Communities in Europe
-
Deciding to form a Hydrogen Community
Technology Scenarios
-
Snapshots of Hydrogen Uptake in the Future - A Comparison Study
-
Profiling Regional and Community Level
-
Electrolyzer to Tank Technology Pathways and Carbon Balance
-
Tank to User Technology Pathways and Carbon Balance Document R2H4004PU.1 == Alternate doc original lost ?? Power trains EU The report defines the major technical and economical evolution steps of H2FC technologies to produce, transport, store and distribute hydrogen The analysis uses a common scenario taking into account high energy prices (140 $/bbl) Results include a mean cost scenario for all analysed pathways with cost for hydrogen ranging between 25 €/GJ H2 (biomass pathway) to more than 100 €/GJ H2 (on-site electrolysis pathway) Cost Models - Secure Supplies offers Extremely Compeditive Prices for Partnership must lower by 90% to these case studies.
Infrastructure
-
http://www.fch.europa.eu/fchju-projects
-
Industrial distribution infrastructure
-
Linking Distributed European Hydrogen Production Sources - PART I
-
Linking Distributed European Hydrogen Production Sources - PART II:
Cost Models in most case Secure Supplies is already 90 % lower prices than this report.
Secure Supplies is experiencing rapid growth, we welcome you business and partnership also.

Grid Power Buffer Sites
are Hydrogen Fueled Engine Power Plant
Make Gas during day from Solar Farm use at peak times to fuel engines onsite or offsite Engine Power hubs built.
-
1 MW Engines units in series or
-
1 MW Fuel cells fueled by Pure Hydrogen

WELCOME TO THE FUTURE
Country Franchises are Open $5,5 Million USD Per Country
And We will Support and Deliver Equivalent Capital Equipment Value to your Country.
Energy Storage Pilot,Store Spinning Reserve ,Make Fuel,
Distribution Hydrogen Fuel Generators and Water Pumps.
S1 Kit Step One now available with LPG to H2
1 MW 25 kw per hr h2 Reformer 99.9999%









SERIOUS ANNOUNCEMENT SECURE SUPPLIES HAS DEVELOPED NATURAL GAS METHANE REPLACEMENT.
WE BLEND NITROGEN AND HYDROGEN TO CREATE A SAFE Alternative to Natural Gas with equivalent slow burn rate/flame speed .
IT IS TIME FOR ALL RENEWABLE ENERGY INDUSTRY MEMBERS TO STEP UP AND HELP CHANGE THE COARSE OF POLLUTION
The Time to Act is now your Air is poisoned